Losmandy HGM-TITAN Equatorial Mount from Venturescope
The HGM-TITAN Equatorial Mount supports up to 100lb instrument weight!
It comes complete with the Gemini Computer GOTO System!
HGM-TITAN SPECIFICATIONS
EQUATORIAL head
- All machined stainless steel and aluminum. Black anodized.
- All stainless steel hardware
- Shafts, 1.968" diameter stainless steel tubing, .250" wall thickness.
- Worm gears, 6.750" diameter, 270 tooth, 7075 aluminum - special coated.
- Worms, heat treated and ground stainless steel.
- Single piece worm housing construction, double ended, ball bearing supported with adjustable preload.
- Tracking: +/- 5 arc sec. or better.
- Low temperature operation: 0 F
- 5.062" diameter needle trust bearings.
- 3.500" diameter sealed ball bearings.
- 3.100" diameter sealed ball bearings for worm gear.
- Fully locking, unique tangent arm design altitude adjustment, 12-70 degrees, large knob for easy alignment.
- Laser engraved latitude scale in 2 degree increments.
- Single knob azimuth control, bi-directional +/- 10 degrees, X/Y axis leveling bubbles.
- Variable slip clutch, 6.0" diameter both axes, one knob design.
- Full 360 degree rotation in both R.A. and DEC.
- Fully enclosed R.A. and DEC. worm and worm gear.
- Photographic instrument weight capacity 100 lbs.
- Equatorial Head weight 75 lbs. Breaks down into R.A. 37.5 lbs. & DEC. 37.5 lbs.
- Removable counterweight shaft with safety stop, 1.25" diameter.
- Includes two 21 lb weights.
- Split dovetail saddle plate design, 1.00" X 6.00" X 8.00"
- Dovetail plate drops in and locks allowing for interchanging of any tube assembly - reduces the need for DEC. weights.
- Accepts all "D" series dovetail plates.
- 7 lb and 11 lb extra counterweights available
- Off axis polar scope, works in Northern and Southern hemisphere. (Polar scope optional.)
GEMINI SERVO SYSTEM
- See Gemini Page for Details
TRIPOD - SOLD Separately
- All machined aluminum, black anodized.
- Semi-pier tripod design
- Adjustable height, 40"- 62"
- Removable legs with clamps.
- Tripod weight 66 lbs.
- 7.00" diameter pier - 3.50" diameter legs.
|
Price: Titan Mount Head with Gemini and new Maxon Motors: £5995.00 |
|
You are welcome to
contact us to ask for a quote for your Losmandy mount with the optical tube of your choice and to
discuss your requirements
for accessories and mounting options.
We will advise you about any extra adaptor plates, counterweights etc.. that you need to mount your telescope tube on this wonderful mount ! |
If this mount is a bit too big, then check out the
Losmandy G-11 Mount
or if it's much too big then look at the
Losmandy GM-8 Mount
or check out the forthcoming
GoTo system
for all the Losmandy Mounts